Nowadays, just about all brand new computer systems are equipped with SSD drives instead of HDD drives. You’ll discover superlatives about them all around the professional press – that they are a lot faster and perform much better and they are actually the future of home pc and laptop manufacturing.

Even so, how do SSDs perform in the web hosting environment? Can they be trustworthy enough to replace the verified HDDs? At DSF Hosting, we are going to make it easier to much better see the dissimilarities in between an SSD and an HDD and choose the one that is best suited for you needs.

1. Access Time

Image

After the release of SSD drives, data access speeds have gone tremendous. Because of the new electronic interfaces utilised in SSD drives, the typical file access time has shrunk to a all–time low of 0.1millisecond.

Image

HDD drives depend on rotating disks for data storage uses. Every time a file will be accessed, you need to wait around for the correct disk to get to the appropriate place for the laser to reach the data file involved. This results in an average access rate of 5 to 8 milliseconds.

2. Random I/O Performance

Image

Thanks to the very same revolutionary method enabling for faster access times, it’s also possible to experience better I/O efficiency with SSD drives. They’re able to accomplish double as many procedures within a given time in comparison with an HDD drive.

An SSD can manage a minimum of 6000 IO’s per second.

Image

Having an HDD drive, the I/O performance steadily improves the more you apply the drive. Nevertheless, in the past it gets to a specific limit, it can’t get quicker. And because of the now–old concept, that I/O cap is a lot below what you might receive with a SSD.

HDD are only able to go so far as 400 IO’s per second.

3. Reliability

Image

The absence of moving components and spinning disks inside SSD drives, and the latest advances in electronic interface technology have led to a much risk–free file storage device, having a common failure rate of 0.5%.

Image

As we have noted, HDD drives use spinning hard disks. And something that takes advantage of lots of moving elements for prolonged amounts of time is susceptible to failure.

HDD drives’ regular rate of failure ranges between 2% and 5%.

4. Energy Conservation

Image

SSDs are lacking moving components and require almost no cooling energy. Additionally, they require not much energy to perform – tests have indicated they can be operated by a common AA battery.

As a whole, SSDs use up somewhere between 2 and 5 watts.

Image

From the minute they have been constructed, HDDs were always very electrical power–ravenous equipment. Then when you’ve got a web server with many types of HDD drives, this will increase the monthly electricity bill.

Normally, HDDs take in between 6 and 15 watts.

5. CPU Power

Image

The faster the file access rate is, the sooner the data queries will likely be processed. It means that the CPU do not need to save resources waiting around for the SSD to answer back.

The normal I/O delay for SSD drives is only 1%.

Image

HDD drives allow for slower access rates as opposed to SSDs do, which will result in the CPU being forced to hold out, although saving resources for the HDD to uncover and return the requested data.

The normal I/O wait for HDD drives is around 7%.

6.Input/Output Request Times

Image

In the real world, SSDs conduct as wonderfully as they did throughout our checks. We competed a full platform data backup using one of the production web servers. Through the backup procedure, the standard service time for I/O calls was indeed under 20 ms.

Image

During the exact same lab tests with the same server, this time around fitted out using HDDs, efficiency was considerably slow. Throughout the hosting server back–up procedure, the typical service time for any I/O requests fluctuated between 400 and 500 ms.

7. Backup Rates

Image

Referring to back ups and SSDs – we’ve detected an amazing advancement in the back–up speed as we moved to SSDs. Today, a normal web server data backup takes merely 6 hours.

Image

Throughout the years, we’ve got utilized predominantly HDD drives with our web servers and we’re well aware of their efficiency. With a web server built with HDD drives, a complete web server backup normally takes about 20 to 24 hours.

Our Linux VPS hosting and additionally the standard Linux shared hosting accounts feature SSD drives automatically. Be a part of our family here, at DSF Hosting, to check out the way we can assist you to enhance your site.

  • Service guarantees

  •  
  • Join us today. There won’t be setup fees and you will have complete root and SSH access to the server. 99.9% network uptime is guaranteed.

  • Compare our prices

  •  
  • Have a look at our rates and choose the right Virtual Private Server for your dynamic websites. You can easily upgrade to a more advanced VPS Hosting plan with only a click of the mouse.
  • Compare our hosting plans

  • Contact Us

  •  
  • You’ll be able to make contact with us around the clock by email or by utilizing our extra–fast ticketing system. We offer a 1–hour response time guarantee.